Filter
Top Products
6
English
After charging is completed
ES‑RF41 ES‑RF31
All the battery capacity lamps will light up and then turn off after
5 seconds.
After charging is completed, turning the power switch ON with
the shaver plugged in will cause all the battery capacity lamps to
light up and then turn off after 5 seconds. This shows that the
shaver is fully charged.
Recommended ambient temper
ature for charging is 15‑35 °C
(59‑95 °F). The battery may degrade the performance or may not
charge under extreme low or high temperatures.
The charge status lamp ( ) will blink when there is a problem
with charging.
When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp ( )
may not glow. It will eventually glow if kept connected.
•
•
•
•
Shave
Using the shaver
1
1
Rotate the lock
ring [D5]
and
press the power
switch [D9].
Page 5
2
2
Hold the shaver as
illustrated above and
shave.
Tips for best shaving results
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver back
and forth in the direction of your beard. You may gently increase
the amount of pressure as your skin becomes accustomed to
this shaver. Applying excessive pressure does not provide a
closer shave.
Using the trimmer
Press the trimmer lock button [D;]
and slide the trimmer handle [D<]
up. Place at a right angle to your skin
and move downwards to trim your
sideburns.