Filter
Top Products
6
English
Cleaning
Clean
1. Disconnect the power cord
from the shaver.
2. Apply some hand soap to the
outer foil.
3. Turn the shaver on and then
pour some water over the
outer foil.
4. Turn the shaver off after 10-20
seconds.
5. Remove the foil frame and
clean it with running water.
6. Wipe off any drops of water
with a dry cloth.
7. Remove the system outer foil
and the foil frame to allow
them to dry completely.
Replacing the system outer foil and the inner
blades
system outer foil once every year
inner blade once every two years
Replacing the system outer foil
1. Press the system outer foil
release buttons and lift the
system outer foil upwards as
illustrated.
2. Insert the system outer foil by
pushing it downwards until it
clicks.
Replacing the inner blades
1. Press the foil frame release
buttons and lift the foil frame
upwards as illustrated.
2. Remove the inner blades one
at a time as illustrated.
Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
3. Insert the inner blades one at
a time until they click as
illustrated.
•
2 3
ES7101-7103_USA.indb 6 2007/07/09 20:53:07