Filter
Top Products
English
3
Using the shaver
Shave
1
1
Depress the switch
lock button and
slide the 0/1 switch
upwards.
2
2
Hold the shaver as
illustrated above and
shave.
Start out shaving by applying gentle pressure to your face.
Stretch your skin with your free hand and move the shaver
back and forth in the direction of your beard. You may gently
increase the amount of pressure as your skin becomes
accustomed to this shaver. Applying excessive pressure does
not provide a closer shave.
•
Using the trimmer (ES3833 only)
Slide the 0/1 switch upwards. Align
the “ ” mark and the “ – ” mark
on the body with each other. Place
at a right angle to your skin and
move downwards to trim your
sideburns.
Cleaning
Clean
1. Remove the protective cap.
2. Apply some hand soap to the
outer foil.
3. Turn the shaver on and then
pour some water over the outer
foil. (Fig. 1)
4. Turn the shaver off after 10-20
seconds.
5. Remove the foil frame while
pressing the foil frame release
button and clean it with running
water. (Fig. 2)
6. Wipe off any drops of water
with a dry cloth.
7. Dry the foil frame and the
shaver completely. (Fig. 3)
ES3833_USA.indb 3 2008/05/27 15:59:19