Filter
Top Products
4
English
The charging time is 8 hours.
1 full charge will provide approximately 40 minutes of continuous
operation.
If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
Inserting the attachment
0.8" / 1.2" / 1.6" (20/30/40mm) comb attachment
1. Adjust the attachment to the desired
trimming height by sliding it until it
clicks while the switch is in
“0•CHARGE”.
Set the attachment to the correct position.
Otherwise you cannot set the switch to “1”.
Actual hair length will be a little longer than
the height you set.
•
•
1/8" / 1/4" (3/6mm), 3/8" / 1/2" (9/12mm) comb
attachments
1/4"
1/8"
1/8" / 1/4"
3/8"
1/2"
3/8" / 1/2"
1. Select the
cutting heights
indicated on the
insides and
sides of the
attachments.
2. Mount the
attachment to
the clipper as
illustrated.
3. Remove the
attachment
from the clipper.
•
•
•
►
►
Parts identification
A Blade
B Attachment mounting
C Switch
D Charging indicator lamp
E 1/8" / 1/4" (3/6mm) comb
attachment
F 3/8" / 1/2" (9/12mm) comb
attachment
G 0.8" / 1.2" / 1.6" (20/30/40mm)
comb attachment
H Lever for cleaning
I AC adaptor (RE9‑45)
J Power cord
K Oil
L Cleaning brush
3
mm
6
20
30
40
mm
Charging
Charge
1. Set the switch
to “0•CHARGE”,
and insert the
power cord into
the clipper.
2. Connect the AC
adaptor into an
outlet. The
charging
indicator lamp
will light up.
3. Disconnect the
AC adaptor
from an outlet
when charging
is completed.