Filter
Top Products
EN
7
GETTING STARTED
BATTERIES
Batteries are supplied with this product:
Main unit 2 x UM-4 (AAA) 1.5V batteries
Remote unit 2 x UM-4 (AAA) 1.5V batteries
It is recommended that you use alkaline
batteries with this product for longer performance.
Insert batteries before first use, matching the polarity
(+ and -) as shown in the battery compartment. For best
results, install batteries in the remote sensor before the
main unit. Press RESET after each battery change.
shows when batteries are low.
Installing the Batteries
NOTE
Do not use rechargeable batteries.
NOTE
UNIT
LOCATION
Main Indoor Temperature
Area
Remote Outdoor Temperature
Area
CHANGE SETTINGS
To change, time, calendar and language settings:
1. Press and hold MODE for 2 seconds to enter setting
mode.
2. Press
or
to change settings. (To reach the
setting you want quickly, press and hold
or
).
3. Press MODE to confirm.
TABLE STAND OR WALL MOUNT
Use the stand on the back of the main unit / remote
sensor, or mount it on a wall with a nail.
Attaching the Table Stand
RAR621 English R4 OP 8/18/04, 5:29 PM7
Black