Filter
Top Products
15
USING THE DEVICE
5. Turn the power switch off.
The power switch is in the position. The
compressor turns off and nebulization stops.
6. Disconnect the Air Tube from the Nebulizer Kit. Hold the Air Plug and
gently pull down to disconnect the Air Plug from the Air Tube
Connector on the bottom of the nebulizer kit.
7. Check the Air Tube. No condensation or moisture should remain in the
Air Tube.
WARNING
Do not store the air tube with moisture or medication remaining in the air tube.
This could result in infection as a result of bacteria.
If any condensation or moisture remains in the air tube, remove the
moisture from the air tube. Follow the directions below:
1. Make sure the Air Tube is still connected to the Air connector
on the front side of the compressor.
2. Turn the power switch on. The power switch is in the (l)
position. The compressor will start and pump air through the air
tube to expel the moisture.
3. Turn the power switch off.
8. Disconnect the Air Tube from the compressor. Hold
the Air Plug and gently pull the Air Plug off the Air
Connector on the front side of the compressor.
9. Unplug the device from the electrical outlet.
CAUTION
Unplug the po
wer cord from the electrical outlet after
using the device.
NE-C28- IM Final 6-8-06 6/8/06 2:21 PM Page 14