Filter
Top Products
M7 English
14
Product name OMRON Digital Automatic Blood Pressure Monitor
Model M7
Display Digital LCD
Measurement range Pressure: 0 - 299 mmHg / Pulse: 40 - 180/minute
Accuracy Pressure: ± 3 mmHg / Pulse: ± 5% of display reading
Inflation Automatic inflation (Fuzzy control)
Deflation Automatic air release by controlled air release valve
Pressure detection Electrostatic capacity pressure sensor
Memory 90 Measurements
Power supply 4 x 1.5V batteries type AA / AC adapter (optional part)
Battery life New batteries will last for approximately 300 measurements
Operating temperature / Humidity +10°C to +40°C / 30% to max. 85% relative humidity
Operating environment Free from excessive vibrations, shocks, magnetic fields, electrical noise, etc.
Storage temperature / Humidity -20°C to +60°C /10% to max. 95% relative humidity
Weight Main unit approximately 400 g, excluding batteries, cuff approximately 130 g
Outer dimensions Approximately 165 mm (W) x73 mm (H) x 110 mm (D), cuff approximately
150 mm (W) x 582 mm (L) arm circumference 22 cm to 42 cm
Accessories Cuff model HEM-CUFF-P, hard case, instruction manual, guarantee card, blood pressure pass
Optional parts AC adapter, extended tube
Note Subject to technical modification without prior notice
= Type B 0197
Manufacturer OMRON HEALTHCARE Co., Ltd.
24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto, 615-0084 Japan
EU-representative OMRON HEALTHCARE EUROPE B.V., Kruisweg 577, NL-2132 NA Hoofddorp
This device fulfils the provisions of the EC dir
ective 93/42/EEC (Medical Device Dir
ective). This blood pr
essure monitor is designed
according to the European standard EN1060, Non-invasive sphygmomanometers Part 1: General Requirements and Part 3:
Supplementary requirements for electromechanical blood pressure measuring systems.
9 Technical data
Cleaning instruction
• Use a soft, dry cloth to wipe stains from the
OMRON M7.
• Use a soft, slightly moistened cloth and soap to
clean main unit and cuff of the OMRON M7.
Caution! Do not use petrol, thinners or similar
solvents!
Caution! Do not wash the cuff!
• Do not carry out repairs of any kind yourself. If a
defect occurs, consult your OMRON retail outlet or
distributor as mentioned on the packaging.
Calibration
• It is recommended to have the OMRON M7
inspected every two years to ensure correct function
and accuracy. Consult your OMRON retail outlet or
OMRON distributor as mentioned on the packaging.
Replace cuff
• Remove the air plug to re-use it with a new cuff.
Replace batteries
• Remove the battery out of the battery
compartment and insert four new identical 1.5V
batteries type AA.
Spare parts
• Due to high company quality standards, OMRON
considers the main unit as a non-serviceable part
because of the need for proper calibration after
replacement of high tech components.
Attention! Disposal of batteries and the
OMRON M7 should be carried out in
accordance with the national regulations
for the disposal of electronic products.
8 Maintenance and spare parts
24031905 M7 GB 01-16 3/25/04 1:59 PM Pagina 14