12
3. Using the Unit
To View the Readings Stored in Memory
1. Press the button, while the average value is displayed.
The Memory number appears for a second
before the pulse rate is displayed. The newest
set is numbered “1”.
2. Press the or button to view the readings stored in
memory.
: To the older readings
: To the more recent readings
To Delete All the Values Stored in Memory
When the memory symbol ( ) appears, first press
the Memory button. Then while holding it down,
press the O/I START button simultaneously for
about 2-3 seconds.
Note: You cannot partially delete the stored readings.
Alternating date/
time display
HEM-7211-E_A_M_main.book Page 12 Thursday, October 7, 2010 2:51 PM