Filter
Top Products
TO CONNECT THE AC ADAPTER
Insert the AC Adapter Plug
into the AC Adapter Jack on
the back side of the monitor
as illustrated.
Plug the AC Adapter into a
120V AC outlet (60 cycles).
TO DISCONNECT THE AC ADAPTER
Hold and pull the Housing to remove the AC Adapter from the
electrical outlet. Do not remove by pulling on the cord.
Remove the AC Adapter plug from the monitor.
WARNING
Do not plug or unplug the power cord into the electrical outlet with
wet hands.
CAUTION
Do not overload power outlets. Plug the device into the appropriate
voltage outlet.
USING THE AC ADAPTER
1
2
16
Housing
Cord
280239_HEM-7011-E_S.qxd 2/19/08 3:00 PM Page 16