Filter
Top Products
21
TITLE
TITLE
TITLE
ERROR INDICATORS
SYMBOL CAUSE CORRECTION
Monitor did not
detect pulse rate
Remove the arm cuff. Refer to
“Applying the arm cuff” on page 12.
Wait 2-3 minutes.
Take another measurement.
Cuff under-inflated
Remove the arm cuff. Read
“Taking a Measurement” on page 14.
Wait 2-3 minutes.
Take another measurement.
Cuff over-inflated
Batteries are worn
Replace the four batteries. Refer to
page 7 for battery installation.
TROUBLESHOOTING TIPS
PROBLEM CAUSES AND SOLUTIONS
No power.
No display appears on the unit
Replace all worn batteries.
Check the battery installation for proper
placement of the battery polarities.
Measurement values appear too
high or too low.
Blood pressure varies constantly.
Many factors including stress, time of day,
how you wrap the cuff, may affect your
blood pressure. Review the sections
“Before Taking a Measurement” and
“Taking a Measurement”
.
HEM-705CP-IM-US 7/19/05 9:26 AM Page 21