Filter
Top Products
SETTING THE DATE AND TIME
The Blood Pressure Monitor stores up to 90 measurement values
with the date and time. The monitor also calculates an average
reading based on the last three measurement values.
Set the monitor to the current date and time before taking a
measurement for the first time. If the current date and time is not
set, the default date and time will display. The measurement values
will be stored in the memory with the wrong date and time.
1.
TO START THE SETTING
Press the SET button four (4) times while
the power is turned off.
The will year flash on the display.
2.
SETTING THE YEAR
The year can be set between 2004 and 2030.
When the display reaches 2030, it will return
to 2004.
Press the MEM button to advance by increments
of one year.
NOTE: Press and hold the MEM button to increase
the values faster.
Press the SET button to set the current year.
The month flashes on the display.
11
HEM-650-IM-US-8012 12/7/05 10:22 AM Page 11