Filter
Top Products
9
HOW TO TAKE A READING
1. Press the On/Off button.
a) All display symbols appear
for about one second. This is the
initial LCD Test.
b) The display symbols
disappear and the Deflation
Indication Symbol ( )
starts to flash.
c) When the monitor completes
the necessary preparations
before measurement, the
Ready To Measure Symbol
( ) appears next to a zero.
NOTE: Wait for the Ready To Measure
Symbol ( ) before taking a measurement.
2. Begin inflating the cuff by rapidly squeezing the inflation bulb
until you have reached approximately 40 mmHg higher than
your normal systolic reading. If your normal systolic blood
pressure is unknown, inflate the cuff to 180 mmHg.
SYSTOLIC mm Hg
PULSE/MIN
DIASTOLIC mm Hg
Please read “How To Apply The Arm Cuff” before taking a reading.
➧
Deflation Indication
Ready To Measure
Initial LCD Test