17
,IWKH3RVLWLRQLQJLQGLFDWRULV³RQ´RU³RQ´
on1: The buzzer sounds only when the monitor is in proper position.
on2: The buzzer sounds a series of two short blips if your wrist is too far away from
the measuring position, and beeps when your wrist is in the proper position.
oFF: The buzzer will not sound.
,IWKH3RVLWLRQLQJLQGLFDWRULV³R))´
on: The buzzer sounds when pressing any buttons.
oFF: The buzzer will not sound.
RESETTING TO THE DEFAULT SETTING
7KHSRVLWLRQLQJLQGLFDWRULVVHW³RQ´WKHZULVWIRUPHDVXUHPHQWLVVHW³
´DQGWKH
EX]]HULVVHW³RQ´DVGHIDXOW
To reset to the default setting, press and hold the SET button while in the setting mode,
then press the START/STOP button simultaneously for more than 2 seconds.
SETTING THE ADVANCED POSITIONING SENSOR (APS)