Filter
Top Products
19
USING THE MEMORY FUNCTION
Every time you complete a measurement the monitor stores the blood pressure
and pulse rate in the memory. The monitor automatically stores up to 60 sets of
measurement values (blood pressure and pulse rate). When 60 sets of measurement
values are stored, the oldest record is deleted to save the most recent values.
AVERAGING FUNCTION
The monitor calculates the average reading based on up to the three most recent sets of
measurement values taken within 10 minutes of the most recent reading.
NOTE: If two sets of measurement values are stored in the memory for the 10 minute
period, the average is based on the two sets of measurement values. If only
one set of measurement values is stored, this is displayed as the average.
TO DISPLAY THE MEASUREMENT VALUES
1. Press the MEM button to display the average reading based on the three most recent
sets of measurement values taken within 10 minutes of the most recent reading.
The Average Value Symbol ( ) appears on the display when the average reading is
shown.
2. Press the MEM button to display the set of measurement values from the most
recent to the oldest.
Alternating date/time
display