Filter
Top Products
RESETTING THE DATE AND TIME
If the date and time is incorrect and needs to be changed, always reset
before taking the next measurement.
To adjust the date or time after the initial setting:
Start with the monitor in the off position.
1. Press and hold the Date/Time Setting button ( ).
The Medication Reminder Alarm Symbol ( ) No.1 and the current
setting (on or oFF) will appear on the display.
Press the Date/Time Setting button repeatedly until the year flashes on
the display.
2. Refer to “Setting the Date and Time, 1. To Start the Setting” on page
16.
The Medication Reminder Alarm Symbol ( ) No.1 and the current
setting (on or oFF) will appear on the display, after the minute has
been set.
3. Press the START/STOP button to turn the monitor off.
SETTING THE DATE AND TIME
19