Filter
Top Products
5
2. Preparation
EN
2.2
Setting the Buzzer/ Date and Time
1. Press the button.
2. Set the Buzzer.
3. Set the monitor to the correct date and time before
taking a measurement for the first time.
4. Press the O/I START button to store the setting.
Notes:
• If the batteries have been removed for 30 seconds or more, the date and time setting will need to be reset.
• If the date and time are not set, “-:--” appears during or after measurement.
1)
2)
Push or buttons to
select On or Off.
Push the button to confirm.
On
Off
1)
2)
Year
Month
Day
Hour
Minute
Push or buttons to
change.
Push the button to confirm.
Next setting appears.