Filter
Top Products
22
3.Using the Unit
To Delete All the Values Stored in Memory
You cannot delete individual stored readings, all the readings in the unit
will be deleted.
1. Press the l/O button to turn the unit on.
2. When the heartbeat symbol ( )
appears on the display, first press
the M button. Then while holding it
down, press the I/O button
simultaneously for about 2-3
seconds. All readings will then be
deleted.
Important: Be careful not to press
the I/O button first. If
the I/O button is
pressed first, the
monitor is shut off.
3. Press the I/O button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut
itself off after five minutes.
1
2
HEM-4022-IM_Main_[D].book 22 ページ ２０１１年１１月２日 水曜日 午後３時２４分