Filter
Top Products
26
3. Using the Unit
5. Press the SET button to confirm the change.
The number of seconds between each measurement is
displayed.
Note: The default value between each measurement is
60 seconds.
6. Press the MEMORY button ( ) to change the interval of time
between each measurement.
The interval can be set to 15 seconds, 30 seconds, 60 seconds
or 120 seconds. Continue to press the MEMORY button until
the desired interval appears on the display.
7. Press the SET button to confirm the
setting.
The year flashes on the display.
8. Press the O/I START button to turn
the unit off.