Filter
Top Products
12
2. Preparation
2.2 Setting the Date and Time
Your blood pressure monitor automatically stores up to 84 individual
measurement values with the date and time.
To make use of the memory and average values functions:
• Set the unit to the correct date and time before taking a measurement
for the first time.
• If the batteries have been removed for more than 30 seconds, the
Date/Time setting will need to be reset.
1. When the O/I START button is
pressed to turn the unit on for the
first time after inserting batteries,
the year digits (2007) will flash on
the display.
2. Press the MEMORY button ( )
to advance the digits one at a time.
Notes:
• The range for the year setting is
2007 to 2030. If the year reaches
2030, it will return to 2007.
• If you hold down the MEMORY
button ( ), the digits will
advance rapidly.
3. Press the SET button to confirm
the setting when the desired
number appears on the display.
The year is set and the month
digits flash on the display.