Filter
Top Products
RX-3 English
12
Maintenance and spare parts
• Use a soft, slightly moistened cloth to clean the
OMRON RX-3.
Caution! Do not use petrol, thinners or similar
solvents!
• Use a soft, moistened cloth and soap to clean the
wrist cuff.
Caution! Do not wash the wrist cuff!
Caution! Do not use petrol, thinners or similar
solvents!
• Do not carry out repairs of any kind yourself. If a
defect occurs consult your OMRON retail outlet or
distributor as mentioned on the packaging.
Calibration
• It is recommended to have the OMRON RX-3
inspected every two years to ensure correct
function and accuracy. Consult your OMRON
retail outlet or OMRON distributor as mentioned
on the packaging.
Replace batteries
• Remove the battery out of the battery
compartment and insert two new identical 1.5V
alkaline batteries type AAA LR03 batteries.
Spare parts
• Due to high company quality standards, OMRON
considers the main unit as a non-serviceable part
because the need for proper calibration after
replacement of high tech components.
• If the cuff needs to be replaced have this done by
an authorised expert. Consult your OMRON
retailer or OMRON distributor as mentioned on
the packaging.
Attention! Disposal of batteries
and the OMRON RX-3 should be
carried out in accordance with the
national regulations for the
disposal of electronic products.
28070106 RX-3 GB 01-16 14-08-2008 15:36 Pagina 12