Filter
Top Products
18
QUICK REFERENCE GUIDE
WARNING!
This monitor cannot be used with a cardiac pacemaker or other implanted medical devices.
The Fat Loss MONITOR with Scale passes an extremely weak electrical current of 50kHz and less
than 500 µA through your body when taking a measurement to determine the amount of fat tissue.
This weak electrical current is not felt while using the monitor. Do not use, or allow others to use,
this monitor if fitted with a cardiac pacemaker or other medical device.
Read all of the information in the instruction manual for the HBF-400 Fat Loss Monitor with Scale
before using the QUICK REFERENCE GUIDE.
1. Turn the monitor ON.
2. Select one of the following personal data options:
Press the USER button.
Select your Personal Profile Number.
Pr
ess the GUEST/MEMORY button.
Enter your Personal Data.
Refer to page 10, Setting Personal Data.
3. Press the SET b
utton.
NOTE:
Wait for the 0.0 lb symbol to appear before proceeding.
4. Step onto the Measurement Platform.
Make sure you are barefoot and the soles of your feet are clean and dry. Position your feet on the
electrodes as sho
wn in the illustration below. Make sure each of your heels is positioned on
a heel electrode. Remain still and do not move until the measurement is complete.
Your weight will appear, then blink on the display. The indicators in the measurement progress bar at
the bottom of the display will begin to appear from left to right. When the measurement is completed,
your weight is displayed ag
ain.
5. Step off the measurement Platform.
The measurement results are automatically displayed repeatedly in the following order:
WEIGHT
%FAT BMI.
6.
T
ur
n the monitor off
.
Heel Electrodes
HBF-400-IM 2/20/06 5:50 PM Page 18