Filter
Top Products
32
USING THE MEMORY FUNCTION
TO DELETE ALL VALUES STORED IN THE MEMORY
The values stored in the memory are deleted by USER ID.
You cannot partially delete values stored in the memory. All values will
be deleted.
1. Press the START/STOP button to turn the monitor on.
2. Select your USER ID (A or B).
3. While holding the Memory button ( ), press the START/STOP
button down for more than 2 seconds until the display appears as it
does in the following illustration.
HEM-7220-ZCS_A_M_e_sp_100510.qxd 10/5/10 10:24 AM Page 32