Filter
Top Products
17
English
16
Time Screen
Time
You can change the time and date setting of your blood pressure monitor.
When reaching the time screen you will see the Gregorian calendar. The
year will be flashing.
1. By using the ( ) buttons you can set the current year.
2. By pushing the SET button you will lock the year and proceed
to the next setting.
For setting the month, date and time repeat step 1 and 2. After setting
the minutes you will proceed to the DELETE DATA screen.
All Memory Erasure
YES Screen
Are You Sure YES
Screen
Data Deleted (Blank)
Screen
Delete data
In this screen you are able to delete all stored measurement from you
OMRON 637IT. Please be careful that deleted data cannot be restored.
The factory preset is NO. If you choose YES the monitor will ask for a
confirmation “ARE YOU SURE?”. To cancel select NO to confirm
DELETE DATA select YES.
After deleting all stored measurements the “Data Deleted Screen” will be
shown. All the stored measurements are deleted and the monitor will be
turned off.
If the stored measurements are not deleted you will proceed to the
RESET SETTINGS screen.
Reset Settings YES
Screen
Are You Sure YES Screen
Reset settings
In this menu you can choose to reset all the settings to the “factory pre-
set” settings. The factory preset for this menu is NO. If you choose YES
by using the ( ) button the monitor will ask you for a confirmation “ARE
YOU SURE?” After confirmation by selecting YES all the settings will be
changed to the factory mode.
The monitor will return to the AUTO MEMORY SCREEN. You can turn off
your monitor by pushing the O/I button.
How to use the computer interface
This blood pressure monitor has a computer interface and is supplied with software to transfer the
memory of the blood pressure monitor to your personal computer.
Required operating environment
The following operating environment is required to operate the communication software as supplied
on the CD-ROM.
Personal computer : PC/AT compatible with CPU of 80486 or above or with
any Pentium processor.
OS : Windows 98SE/ME/XP/2000
Memory (RAM) : 16 MB or more
Hard disk : Free area of 10 MB or more is necessary
Display : 640 x 480 pixels or more
Disk drive : CD-ROM drive
Connection port : Free USB connection port
How to install the software
1) Turn on your personal computer
......Your windows desktop is displayed
2) Insert the CD-ROM in the disk drive
3) Open the control panel
• Click the “Start” button.
• Point the mouse pointer to “Settings” on the menu.
• Click “Control Panel”
4) Open the “Add/Remove Programs” by double clicking the icon
5) Execute the installation
• Click the “install button”
• Follow the instructions
• The software is installed on your personal computer
How to uninstall the software
1) Open the control panel
• Click the “Start” button
• Choose “Settings”
• Click “Control Panel”
2) Open the “Add/Remove Prograns” icon by double clicking
3) Delete the application
• Click “BPFile” from the list
• Click the Add/Remove button
• .....The confirmation screen is displayed
• Click “Yes”
• .....”BPFile” is deleted
• Click “OK”