Filter
Top Products
2-25
Using the Handheld Infrared Thermometer
2
2.3.12 Erasing the Temperature Data from Memory
The user can erase all 100 temperature data points in
memory at any time by using the following procedure:
1. Pull the trigger and press the key. The
icon will appear.
2. Press the and keys in rapid sequence.
If the icon disappeared, repeat steps
1 and 2
The display freezes momentarily, and a beep
sounds for about 1 second. Now the memory
is cleared. The thermometer reverts to real
time mode.
Erasing the temperature data does not erase or
reset Emissivity, High and Low Alarm setpoints,
printing interval and Ambient Target Temperature
compensation
3. After all data is erased from memory, press the
key to unlock the trigger.
NOTE
NOTE