Filter
Top Products
Using the Handheld Infrared Thermometer
2
2-8
1. Mount the thermometer on a camera tripod and aim at the
target.
2. Connect the analog output of the thermometer to a strip chart
recorder as shown in Figure 2-11.
3. Pull the trigger and press the key to lock the trigger.
4. If necessary, adjust the emissivity.
5. The thermometer is now set up for unattended monitoring of
temperature over time. You can also download the temperature
to a Serial Printer or a PC for further analysis (Models OS533E,
OS534E, OS523E, OS524E).
6. After all data is taken, press the key to unlock the trigger.
2.3 Real Time Mode (Active Operation)
Definition: Real Time Mode is the active operational mode of the
thermometer. In this mode, the thermometer constantly measures
and displays temperature.
Figure 2-12. General Operational Block Diagram
FUNC
LOCK
LOCK