Filter
Top Products
This standard reflected light illumination stand
supports observation conditions where no transmitted
light is needed.
Smooth horizontal movement and rotation enable
specimen observation from various angles.
Equipment answering various needs
Equipment answering various needs
A wide array of accessories to observe
various specimens
Standard stand (SZX2-ST) Universal stand type2 (SZ2-STU2)
Stands and optional units
Large stand (SZX2-STL)
Large stage plate (SZX-CL)
This stage plate attaches to the top
of a transmitted light illumination
base and can be detached for easy
sterilization and other antiseptic
procedures.
This stand provides a large working space to
accommodate large specimens.
CO
2
incubator* (MI-IBCSZXF)
This CO
2
incubator is developed especially for
the SZX2. Transparent glass heaters
positioned above and below samples will
create a stable environment within,
equivalent to a CO
2
incubator. Long-time
observation of specimens during cultivation
is therefore possible. The glass heater above
the chamber dries off condensation for a vivid
imaging environment.
Thermo plate*
(MATS-55SZX2A/
MATS-55SZX2B)
Compatible with the SZX2 only,
this thermo plate has a
temperature range that may be set
from room temperature to 50˚ to
keep the specimen warm.
Transmitted light guide adaptor (SZX-TLGAD)/
Light guide (LG-SF)
Dual combination light guide (LG-DFI)
Dual inter-lock light guide (LG-DI) Ring light guide (LG-R66)
Transmitted/Reflected light illumination base
Accessories
Light beam splitter (SZX2-LBS)
Coaxial illuminator
(SZX2-ILLC16/SZX2-ILLC10*)
As the light guide LG-SF power source is mounted away
from the transmitted light illumination base, increases in
illuminator surface temperature are prevented.
This light guide can be positioned as the observer likes
for bright, even illumination - especially effective when
high-contrast images are required. The spot lens HLL301*
can be mounted.
Used with the dual flexible light guide LG-DF*, this
illuminator provides bright, even illumination without the
need for centering adjustments to the lamp.
With its ø66mm diameter mount, this ring light
illuminator has been specially developed for
stereomicroscope compatibility. When mounted with ring
light adapter SZX-LGR66*/LGR66, it provides bright,
uniformly lit images especially avoiding glaring
reflections or obscuring shadows.
The adapter allows a digital camera or
other imaging unit to be attached on
both sides of the SZX2-LBS body. The
light path to the camera port is switched
between 100% and 50% light. The 100%
light path to the camera port enables
image capturing of dark specimens.
This simple polarizer should be used
with a transmitted light illumination
base. It provides double-refractile
image observation of such specimens
as sea urchin larvae. Analyzer should
be attached on the tip of objectives.
Simple polarizer (SZX-PO)
and analyzer (SZX2-AN)
The SZX2 light guide can be mounted directly onto the
focus drive, keeping the observation position properly
illuminated even when focus is adjusted or when the
specimen is exchanged.
* Compatible with the SZX10 only.* Due to be launched in the summer of 2006.