Filter
Top Products
3
Excellent cost-performance in reflected light fluorescence
and other observation methods
Dry darkfield condenser / CX-DCD
This dry-type darkfield condenser gives a
superior darkfield effect without the need for
immersion in oil.
Suitable for use
at 10x and 40x
magnifications.
Darkfield central stop / CH2-DS
For darkfield observations from 4x to 40x.
* Separate filter holder (CH2-FH) or attachment lens (CX-AL)
required.
Low magnification adapter /CX-LA
Use of the 2x low magnification objective allows
macro observation.
Simple phase contrast attachment /
CX-PH1, 2, 3
For phase-contrast observations at 10x,
40x and 100x.
Slide condenser / CX-SLC
Brightfield condenser / CH3-CD
These Abbe type condensers allow
brightfield observations from 4x to
100x. Accurate centering is provided
by the attachment lens (CX-AL) and the
iris diaphragm, to exclude unnecessary
light and obtain bright Koehler
illumination right across the
magnification range. These highly
economical condensers enable phase-
contrast and darkfield observations by
simply adding basic accessories.
Reflected light fluorescence
attachment / CX-RFL-2
Users can swap between blue or green
excitation and transmitted light
observations. UIS optics provide bright
fluorescence images, with no intermediate
magnifications when changing from
transmitted light to fluorescence
observation. Standard PLC objectives can
be used without replacement.
Simple polarizing condenser /
CH3-CDP
With the optional plate adapter U-TAD,
polarizing observations from 4x to 100x
using a tint plate can be performed.
A U-GAN analyzer is provided for gout
inspection. Polarizing objectives from
4x to 100x are
available.
* Separate polarizer
U-POT and analyzer
U-ANT required.