Filter
Top Products
1. Familiarize yourself with this unit.
2. Place unit on a stable, flat surface which is clean and free of dust. DO NOT set base on
carpet or other soft surface. This could cause air flow restriction and damage to unit.
3. Check to see that the Power switch is in the
“OFF” position. Plug power cord into
electrical outlet.
NOTE
Before attempting to start a cold unit, let the unit reach room temperature.
4. Press the Power Switch (at the rear lower position) to “
I” (ON) position.
5. Press the ON/OFF button first and then press the Start Timer Button to start the unit.
NOTE
Do not use the O2-B™ Portable Oxygen Bar more than 30 minutes per session.
5
Power Switch
“OFF” Position
Power Switch
“ON” Position
Start Timer Button
ON/OFF Button
HOW TO OPERATE YOUR
O2-B
™
Portable Oxygen Bar
Figure 4
Figure 5
Figure 6