Filter
Top Products
PAGE 30 — TANDEM ROLLER: T23, T26, T33 — PARTS & OPERATION MANUAL — REV. #4 (03/12/01)
MAINTENANCE & REPAIR
1) Hydraulic tank breather
Slacken the breather to release the tank pressure,
otherwise it is impossible to top up oil.
2) Oil drain plug
Unscrew the oil drain plug (1) and drain the oil into a pan.
Then screw the oil drain plug back in again.
Filling capacity of hydraulic system: 48L
3) Oil filter
Remove hydraulic oil filter with the special wrench (wrench
(1) with the ref.390159 is supplied with the machine) in
pocket behind seat.
4) Hydraulic oil
Fit a new hydraulic oil filter onto the filter cap. Refill fresh
hydraulic oil through the filter housing and re-install filter.
Retighten tank breather.
Attention:
Never remove the filter cap before any dirt around the
neck has been cleaned off! Always change filter and oil at
the same time. First oil change after 500h, then every
2000h, but at least once a year.
Main components
➊
➊
➊