Filter
Top Products
10 11
10 11
INTRODUCTION
To get the best out of your new
apparatus, please read this user
guide carefully before using it for the
rsttime.Wealsorecommendthat
you keep the instructions for future
reference, so that you can remind
yourself of the functions of your
apparatus.
SAFETY MEASURES
Normal use of the apparatus
• Incorrect use of this apparatus
may cause personal injury and
damage.
• Use for its intended purpose
only. The manufacturer is not
responsible for any injury or
damage resulting from incorrect
use or handling (see also
Guarantee Terms).
• For connection to 230 V, 50 Hz
only.
• For domestic use only. Not for
outdoor or commercial use.
• Always turn the apparatus off
using the on/off button, and unplug
it, when it is not in use.
• Please note that the apparatus will
remain hot for a while after you
switch it off. Always allow it to cool
completely before you put it away.
• Always keep the apparatus at
asafedistancefromammable
objects such as curtains,
tablecloths or the like.
• Never leave unattended when in
use, and Keep an eye on children.
• Caution! The plates of the hair
straightener get very hot. They
must not come into contact with
the skin, as this can cause burns.
• Do not cover.
• Do not expose to direct sunlight
for long periods.
• Do not place or store near other
heat sources or in a damp
environment.
Cord, plug and mains socket
• Keep cord away from hot objects
andopename.
• Check regularly that neither the
cord nor plug is damaged and do
not use if there is any damage, or
ifithasbeendroppedontheoor,
dropped in water or damaged in
any other way.
• If the appliance or plug is
damaged, it must be inspected
and if necessary, repaired by
an authorised repair engineer,
otherwise there is a risk of electric
shock. Never try to repair the
apparatus yourself.
• Remove the plug from the socket
before cleaning.
• Avoid pulling the cord when
removing the plug from the socket.
Instead, hold the plug.
• Do not wind the cord around the
apparatus.
• Check that it is not possible to
pull or trip over the cord or any
extension cord.
KEY TO MAIN COMPONENTS OF
THE APPARATUS
1. Power indicator
2. Set button
3. On/off button
4. Heat display
5. Power cord with plug
6. Ceramic hot plates
USING THE APPLIANCE
• Place the plug (5) in the socket.
The power indicator (1) will come
on. The appliance will not start to
heat up yet.
• Press the on/off button (3) when
you are ready to use it.
o The heat display (4) will come on
and show "100".
o The ceramic hotplates (6) will
quickly heat up to operating
temperature.
• Set the desired temperature by
pressing the setting button (2).
o The temperature can be set
between 100 and 180 ºC in
intervals of 10 degrees.
o When setting or changing the
temperature, wait 10-20 seconds
while the appliance heats up or
cools down to the temperature
selected.
• Use the appliance to set your hair
as desired.
UK