Filter
Top Products
14 15
14 15
USE
• Hair should be clean and dry
before using the apparatus.
• Do not apply wax, gel, mousse or
the like direct to the brushes.
• Fit a round brush (7 or 8) or
straightener (9):
o Fit brush to apparatus outlet. Align
the white dot on the underside of
the brush with the triangle above
the lock button (6).
o Press rmly into place. The brush
can be a tight t the rst few times.
Work it into place by rocking it
downwards.
o Turn brush to the left until the
triangle on the underside of the
brush is aligned with that above
the lock button. The brush will
click into place.
o Check that the brush is secure.
o Please note: The apparatus can
also be used without a brush as an
ordinary hair dryer.
• To switch on, set the speed
selector (2) to one of the two
positions above 0.
o The indicator light (3) on the handle
will come on.
o Activate the cool
shot button (1)
by pressing the
red lock button
and pushing
upwards.
Release the lock
button in this
position. The
apparatus will now emit cooler air.
This is useful when your hair is dry
and needs to be set. Deactivate
the button by pressing in and back
to its original position.
o The automatic ionising function
prevents static electricity in the
hair and makes it soft and shiny.
• Dry and set hair as described
below.
• To switch off, set the speed
selector to position “0”.
• Remove brush by pressing the
lock button in, turn the brush to
the right and extract from the
apparatus.
• The apparatus can be hung up
using the loop (5) at the bottom of
the handle.
Using the round bushes
• Brush hair with an ordinary brush
or comb while still wet.
• Roll a lock of hair around the
brush. The larger the amount of
hair treated at a time, the looser
the curls will be.
• Switch apparatus on, allow hair
lock to dry while rolled up on the
brush.
• Unroll hair from brush. The hair will
now curl.
• If using the round brush with
retractable bristles (7), press
handle in when hair is dry. The
bristles will retract, making it easier
to take brush out of hair.
Using the hair straightener brush
• Brush hair with an ordinary brush
or comb while still wet.
• Take a lock of hair, clamp the
straightener brush (9) plates
around it at the base by pressing
the handle in.
• Switch apparatus on.
• Slowly slide the apparatus towards
the hair ends in a uent movement.
• Keep the hair tight to avoid kinks.
• For more lift in the hair, smooth
only the outer part of the hair lock.
Styling tips
• Brush hair thoroughly before drying
and setting.
• Divide your hair up into small
sections, and deal with them
separately piece by piece as
described above until the desired
result is achieved.
CLEANING
• Remove the plug from the socket
before cleaning.
• Allow to cool down before
cleaning.
• Do not use strong or abrasive
cleaning agents, solvents or
similar to clean the apparatus, as
these may scratch or damage the
external surfaces. Instead, wipe
with a soft dry cloth.
• Never submerge the apparatus
in water, and no water must be
allowed to get into it.