Filter
Top Products
P 3/ 8
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Gear Housing Complete (cont.)
DISASSEMBLING
(2) Disassemble the component parts from Gear housing complete as drawn in Fig. 3.
1. Remove Stopper by unscrewing
Bind CT4x12 Tapping screw.
Stopper
Bind CT4x12 Tapping
screw
Die holder
section
2. Pull off Die holder section from
Gear housing complete.
Fig. 3
Punch
Gear housing
complete
4. Remove Punch holder together
with Punch from Ram.
5. Remove Gear complete 16-36
from Gear housing complete.
Note: Be careful not to lose
Flat washer 6.
3. Set Punch to the lowest position
by turning Gear complete 16-36.
Gear complete
16-36
Ram
Punch holder
Punch
Spur gear 31
6. Lift up Spur gear 31 until the
space for twisting Spur gear 31
and Crank shaft is reserved.
7. Remove Super gear 31 together with Crank section
while turning them 90°.
Note: Be careful not to lose Flat washer 8.
Flat washer 6
Flat washer 8
Gear complete 16-36