Lumiscope 1133 Blood Pressure Monitor User Manual


  Open as PDF
of 48
 
15
5. Thesameprocedurecanbeusedtorecall“M2”measurements.
Deleting the Memory
fig. 11-3
To clear memory: After a measurement is finished or when the device is in standby mode, press
andholdbutton“M1”or“M2”foratleast5seconds.Thedevicewilldisplay“Clr”,whichmeansthe
storedreadingsfor“M1”or“M2”havebeendeleted,asshowninFig.11-3.
 previous next