Lumiscope 1095 Blood Pressure Monitor User Manual


 
5
Preparing to Use the Monitor
Using the Monitor Attached to the Arm Cuff
• Angle the bottom of the monitor against the
raised part of the plastic piece on the cuff
(fig. A).
• Line up the holes on the back of the monitor
with the pegs on the plastic piece of the
cuff.
• Push the monitor onto the cuffand make
sur
e it is securely fastened.
• Now you can use the monitor while it is
attached to the cuff (fig. B).
The 1095 can be used either attached to the cuff or as a table-
top monitor with the enclosed airtube attachment.
Using as a Tabletop Monitor
• To release the monitor from the cuff, press
and hold the release button on top of the
monitor and pull the monitor away from the
cuf
f.
• Connect the monitor end of the air tube to
the holes on the back of the monitor (fig. C).
• Connect the cuff end of the air tube to the
peg on the plastic piece of the cuff (fig. D).
Push the connection into the cuff until you
hear a clicking sound.
• Now you can use the monitor as a desk-
top unit (fig. E).
NOTE: T
o detach the air tube from the main
unit, simply press and hold the release
button while pulling the tube connection
away from the unit.
Realease
Button
Peg
Fig.C
Fig. D
Peg
Fig. A
Fig. B
Fig. E