Filter
Top Products
Installing (or Replacing) Batteries
Caution
Insert each battery with its positive (+) and negative (-) terminals properly
aligned with the corresponding symbols in the battery compartment.
Replace all four batteries with new ones, when the symbol appears
flashing.
When the batteries are depleted completely, nothing is displayed even if the
switch is pressed.
Do not mix used and new batteries. It may cause damage to the batteries or
scale, if used.
The battery life is dependant upon the environmental temperature, battery
type and usage.
Remove the batteries from the battery compartment, when the scale is not to
be used for a long time. They may leak and damage the scale.
The battery life of the accessory batteries may be shorter than new ones.
Steps for Installing (or Replacing) Batteries
1 Remove the battery compartment cover on the
underside of the scale by gently pushing the
hook in the direction indicated by the arrow and
lifting the cover backward.
2 Install four new batteries with the positive (+)
and negative (-) terminals properly aligned with
the corresponding symbols in the battery
compartment.
3 Replace the cover by sliding it into the
compartment and gently pressing into place.
Maintaining the Scale
Clean the scale with a soft dry cloth or a cloth moistened with water and a
mild detergent. Never use alcohol, benzene, thinner or other harsh
chemicals to clean the scale.
Remove the batteries, if the scale is not going to be used for a long time.
- 4 -