Filter
Top Products
51
ENG
ENGLISH
CUSTOMIZING SETTINGS
PIP/PBP
Displays videos or photos stored in the USB device on
a single monitor by dividing it into the main and sub
screens.
Position
Mode
Size
top left top right
bottom left bottom right
*PIP (Picture In Picture): Displays the sub screen
in the main screen.
*PBP (Picture By Picture): Displays the sub
screen next to the main screen.
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
Adjusts the size of the subscreen (Size 0-10).
< 1920x1080 >
PBP
960x1080
0 :
480x270
PIP
10 : 960x540
y
The subscreen is only supported when using
the USB device.
Sub
USB
Main
Component O
RGB O
HDMI/DVI-D/Display Port O
AV X
y
You can only change the size and position in
PIP mode.
y
With PBP selected, the Aspect Ratio option
in the PICTURE menu is disabled (Fixed as
16:9).
y
While running the PBP function, the Tile
Mode function does not work.
y
You must select the output sound before
running the PIP or PBP functions. (Select
either main or sub.)
y
If you fail to select main or sub from the
sound selection box, and if the OSD
disappears after either a period of time or
when the Exit or Back key is pressed, the
PIP/PBP subscreen is not activated.
y
You cannot change the sound while running
the PIP or PBP functions. If you want to
change the sound, please restart PIP/PBP.
y
The picture quality of the subscreen is set
according to the values selected in the main
menu, not the USB device.
y
When the power is turned off/on, the PIP/
PBP mode is disabled.
y
If you play videos you selected in PIP/PBP
mode, the videos will play back repeately in
succession.
y
The buttons below work in PIP mode.
Button Photo Movie
NOTE
Main
Screen
Sub
Screen
PIP
PBP