Filter
Top Products
Microscope carrier
The microscope carrier can be attached to the focusing drive in
2 positions:
• For short working distances and for
flat objects, use Position 1.
Use this position also in conjunction
with the attachment for vertical and
oblique observation (see detailed in-
structions).
• Use Position 2 for long working
distances and for bulky objects.
̈ Use an Allen screw to secure the micro-
scope carrier in the position required.
A connection socket for a ∅ 4 mm
grounding cable is provided on the
microscope carrier.
• Different models are available for MS5,
MZ6, MZ7
5, MZ95 and for MZ125, MZ16
and MZ16 A (see p. 18).
• The microscope carrier AX can only be
fitted in position 1 to the focusing drive.
Optics carrier
̈ Gently lower the optics carrier
into the microscope carrier.
̈ Use the screw to secure the optics
carrier in the position required.
Only for MZ7
5:
̈ Remove the screws.
̈ Remove the rotary knobs.
̈ Apply the adhesive scales.
̈ Replace the rotary knobs.
34
Leica M Stereomicroscopes – Assembly
Microscope carrier ➜
drive housing
Microscope carrier AX
Optics carrier ➜
microscope carrier
Apply the adhesive
scale of
magnifications