Filter
Top Products
12 Kramer VSPM - Using the Kramer VSPM
4.3 Editing Port Details
To edit the COM port details, do the following:
1. Select the COM port you want to edit (for example, COM3).
Figure 17: Selecting a COM Port for Editing
If the machine application is running, you can only change the Label
name and check/uncheck the Reconnect on connection loss box. You
cannot edit the Port Number, Destination IP and Destination Port if the
virtual port is used by the machine application program.
2. Click the button to edit the selected COM port and change the COM3
details.
!