Kompernass SFB 85 A1 Pedicure Spa User Manual


 
- 4 -
Place massage accessories for the
middle console
Select a massage accessory for the point
massage.
Roller massager: stimulating rolling massage of
the feet for relaxation of the feet.
Accupressure massager: for Shiatsu Massage
(Asian finger pressure mas-sage) of the feet.
º Finger massager: for massaging the feet.
Simply set the respective massage accessory in
the recess of the middle console between
both footbeds.
Filling with water
ƽ
Danger of an electric shock!
Only fill the water container to the marking
„MAX“ (ca. 3l). Otherwise, water could over-
flow during the foot spa.
First connect the appliance to the power source
when you have filled it with water.
Fill the water bath with warm or cold water.
Note: The purpose of the heating function is not
to heat cold water.
It should simply maintain the temperature of the
water.
You can also use special bath additives. Howe-
ver, do not use any foam-creating bath additives.
Switching on
ƽ
Warning!
Do not switch the foot spa on when your feet are
in the appliance.
Insert the power plug in the socket.
Sit comfortably on a chair. But do not put your
feet into the water yet!
Adjust the switch to the desired combination.
You can set the described functions in the following
combinations:
- Function switch
position 0: Appliance switched off
- Function switch
position 1: Massage + Heat
- Function switch
position 2: Massage + Heat + Bubble
- Function switch
position 3: Heat + Bubble
Using the foot spa
Now place your feet in the water container.
During the water bath you can alternately mas-
sage the soles of your feet on the massage at-
tachments.
ƽ Caution: Do not exceed the maximum operating
period (KB-Time) of 20 minutes! The appliance could
be irreparably damaged. Danger of overheating.
After the foot bath
Turn the appliance off at the function switch
and remove the plug from the electrical socket.
Carefully empty the water out through the water
drainage feature ´.
Apply skin care oil to your feet.
Then rest for a while.
1
0
2
3
IB_SFB85A1_49397_LB6 23.04.2010 10:52 Uhr Seite 4