Filter
Top Products
9
4. Setting the clock
ᕣ This is necessary if you wish to save your measure-
ments and evaluate them. Press the
MODE button .
ᕤ The display shows the month, day, and time. You can
jump from one position to the next by pressing the
button again. The currently selected position flashes.
ᕥ Press the
SET button to change the value at the
flashing position. For the clock time, the second part
of the day is indicated by a small letter “P” (for PM)
under the colon character.
The settings are stored when the last position is completed.
ᕤ
ᕣ
ᕥ