- 3 -
Intended Use
This foot spa is intended for personal, home use. Its
function is only to bathe and massage the feet. It is
not suitable for any other purpose. It is not intended
for use in the medical/ therapeutic or commercial
fields.
Delivery Items /
Appliance Description
ᕡ Function switch
ᕢ Cover
ᕣ Recesses for accessories: foot pad
ᕤ Recesses for massage accessories
ᕥ Water drainage
ᕦ Roller massager
ᕧ Accupressure massager
ᕨ Finger massager
ᕩ 2 Accupressure accessories
µ 2 Roller massage accessories
Operating instructions
Technical data
Rated voltage:......................220 - 240 V
~
50Hz
Rated output:..................................................85 W
CO Time: ....................................................20 min.
Protection class:................................................II
CO Time
The CO Time (Continuous Operation Time) details
how long an appliance can be operated without
the motor overheat-ing and becoming damaged. Af-
ter the appliance has run for this period it must be
switched off until the motor has cooled itself down.
Functions of the Foot Spa
This foot spa has three functions available which
can be used in various combinations:
1. Bubbles: Air emerging from the air-jets provides
the formation of air bubbles, which massage the
feet pleasently and gently.
2. Heat: The foot pad heats itself and thus provides
for a constant water temperature.
3. Massage: The foot accessories with massage
nubs create through vibration a pleasant massage
effect.
Operation
Setup
➩ Place the foot spa on the floor in front of a chair.
➩ Set the function switch ᕡ to 0 (OFF).
Insert the accessories for the foot
pads
ᕣ
➩ Select the accessories for the foot pad:
- Accupressure accessories with nubs ¾ for a
gentle vibration massage
- Roller massage accessories µ for an additional
point massage of the soles
➩ Place the accessories in the recesses provided
for them ᕣ in the foot pad. The accessories for
the recesses ᕣ bear the markings „L“ for left
and „R“ for right on their reverse side.
IB_KH5557_E4349_LB3 10.04.2008 9:19 Uhr Seite 3