Filter
Top Products
7
NOTES ON HOW TO USE
Charge your electric toothbrush before its first use for a minimum 16
hours. After a complete charge cycle attach the brushhead with a colour
ring of your choice. Position the brushhead with the head pointing in
the same direction as the switch.
Select one of the 4 possible positions respectively by activating the “I”
button.
Press 1 x = „Fast“ speed with 2-minute timer
Press 2 x = “Slow” speed with 2-minute timer
Press 3 x = Massage function with 2-minute timer
Press 4 x = Off
Button 0 = Off
“0” is the Reset/Off switch. Press for immediate reset or to turn off
your electric toothbrush.
2-minute timer: After two minutes of operation a two-second clicking
signal can be heard
Massage function: The brush head alternately runs 3 seconds at fast
speed and 3 seconds at slow speed to generate a soft massage function
for your gums.
Thoroughly rinse your mouth before brushing your teeth and moisten
the brushhead. Use any regular toothpaste. Turn on the electric
toothbrush after pointing the brushhead toward your teeth. This pre-
vents splashing. Move the brushhead to start with along the chewing
surface of your teeth. Then continue with the outer and inner sides of
your teeth. Be sure to reach the interdental spaces and all gum areas. It
is not necessary to apply pressure onto the toothbrush. Brush your teeth
for a minimum 2 minutes to thoroughly remove plaque. Rinse your
mouth again thoroughly after brushing your teeth. Bleeding gums may
occur during the first few days of use, especially if the user generally
tends to suffer from bleeding gums. This bleeding should cease after a
few days. If the bleeding persists for more than two weeks, consult your
dentist.
Clinical research has shown that the best cleaning results are obtained if
Manual_GB 18.12.2002 11:38 Uhr Seite 7