Filter
Top Products
User Keypad
NOTE: The illustration of the user keypad differs slightly from the user keypad equipped with your
model. The Backjet Mode is not equipped with your model.
Available modes will be illuminated in blue. Active modes will be illuminated in green.
Power Turns the whirlpool pump on and off. Icons illuminated in blue indicate available
modes/features. Modes which are operating will be illuminated in green.
Outer Ring Rotate the outer ring to the desired mode. The selected mode will flash blue.
OK Activates the desired mode.
Flexjet Flow
Mode
Rotate the outer ring to select this mode. Press OK, then press the up or down arrow to
increase or decrease the jet water flow.
Up Arrow Increases the water flow when the Flexjet flow mode is active. Increases the pulse speed
when the neckjet or backjet mode is active.
Indicator Bar Displays the water flow volume in the Flexjet flow mode. Displays the pulse speed in the
neckjet or backjet mode.
Neckjet Mode Rotate the outer ring to select this mode. Press OK, then press the up or down arrow to
increase or decrease the pulsing action. Rotate the outer ring to the Flexjet mode, press OK
to activate the mode, then press the up or down arrow on the keypad to increase or
decrease water flow to the neckjets and all other active modes.
Down Arrow Decreases the water flow when the Flexjet flow mode is active. Decreases the pulse speed
when the neckjet or backjet mode is active.
Heater Automatically engages when the power icon is selected. Rotate the outer ring until the
heater mode is flashing, then press OK to turn the heater off. Press OK again to turn the
heater back on.
Lighted User Keypad
Power On/Off
Flexjet Flow Mode
Activates Mode Selected
Increases Flow or Pulse
Neckjet Mode-Adjust Pulse
Decreases Flow or Pulse
Backjet Mode-Adjust Pulse
Heater
Indicator Bar - Shows waterflow
volume or pulse speed
Rotate outer ring to
access desired mode.
1019490-5-C 4 Kohler Co.