Filter
Top Products
Before using the hair clipper, make sure
the blades are clean and well oiled.
Unwind the cord to its full length, ensure
that the on/off switch is off ‘O’ and plug
the cord into a 230 /240V power outlet,
then turn the power on.
Operate the hair clipper with the
ON/OFF switch.
NOTE: For uniform cutting, never push or force the
hair clipper through the hair at a fast speed.The
hair clipper works most efficiently when it works at
its own speed.
Adjustable Lever
The adjustable lever adds versatility to
your hair clipper by allowing you to
gradually change the closeness of your cut
without using an attachment comb.
When the lever is in the uppermost
position, the blade will give you the
closest cut.To increase the cutting length,
push the lever downward gradually.
The lever extends the variety of lengths
that can be achieved with each attachment
comb, by using the varying cutting edges
with each attachment comb.
Attachment Combs
Attachment combs should be fitted to
hair clipper by placing the top edge (comb
edge) of the attachment comb over the
top of the cutting blades.
Gently lift the tab at the other end of the
attachment comb and push down until a
click is heard.
Attachment Comb #1 – leaves hair
approx. 3mm (1/8") in length
Attachment Comb #2 – leaves hair
approx. 6mm (1/4") in length
Attachment Comb #3 – leaves hair
approx. 9mm (3/8") in length
Attachment Comb #4 – leaves hair
approx. 12mm (1/2") in length
Initially cut only a small amount of hair
until you become accustomed to the
length each attachment comb leaves the
hair.
It is suggested to try the longest
attachment comb on the hair clipper first,
then use the shorter one if a shorter
length is desired.
4