Kalorik EBS 37070 Microscope & Magnifier User Manual


 
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame.
3 EBS 37070 - 111026
Assembly page 3/20
Fax +1 305 430 9692
CHARACTERISTICS OF YOUR SCALE
Bamboo platform
Large LCD display with blue backlight
Three weight units : kg / lbs / stone
Maximum weight = 180 kg / 396 lb / 28.4 st.
Precision of the measurement = 0.1 kg / 0.2 lb / 1 lb
Low battery indicator and overloading indicator
Auto-on, auto-zero and auto-off functions
BEFORE THE FIRST USE
This appliance works with 2 lithium batteries (3.0 V, type CR-2032, included).
Open the lid of the battery housing, on the rear part of the scale. Place the
batteries, respecting the polarity indicated, and then close the lid (the “+”
side of the battery shall be facing the user; insert the batteries toward the
metallic contacts first). You can now use your scale.
WEIGHT UNIT
Your scale allows you to use the metric measurement system (kilograms) OR
the imperial system (pounds) OR the British system (stone). Choose the
measurement system by pressing the “UNIT” switch. LCD screen will display
“kg…lb…St” depending on the measurement system you wish to use. This
switch is situated on the rear side of the appliance.
USE
Put the scale on an even and hard surface. Avoid carpets or soft surfaces.
Always use the same scale and at the same place if possible.
1) Step on the scale and stay as still as possible.
2) LCD screen will light on.
3) The stabilized weight is displayed (and flashes twice).
4) Step off the scale.
5) The scale turns off automatically 10 seconds after the weight is
displayed
If the displayed weight seems wrong, you can check if the scale is well
calibrated. To do so: