Kalorik CR-2032 Bathroom Aids User Manual


 
#
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Dont change
the page numbering. Keep the language integrity. Print only
what is inside the frame.
4 USK EBS 33086 - 111026
Assembly page 4/20
Fax +1 305 430 9692
1) Check that your scale is on a hard and even surface and that the 4 feet
touch the ground.
2) When the scale is turned off, gently push with your foot on the right or left
superior corner.
3) The scale will turn on correctly and the LCD display will show 0.0.
4) Step on the scale (turned on) and remain as still as possible.
5) The stabilized weight is displayed (flashes twice).
6) Step off the scale.
7) The scale turns off automatically.
ERROR INDICATION
If the display shows symbols randomly or if the scale doesnt turn off
automatically, it means that your scale has a problem (wrong initialization
or weighing error).
Step off the scale and wait for it to turn off.
You can start again.
If the problem goes on, remove the batteries for 10 seconds, and then put
them back in place.
OVERLOADING INDICATOR
If the symbol appears on the LCD screen, it means that the
maximum weight accepted by your scale is exceeded, please step off in
order not to damage your scale.
LOW BATTERY INDICATOR
If the symbol is displayed on the LCD screen, it means that the
batteries of your scale should be replaced (see paragraph Before the first
use).
BATTERY
If your appliance does not work properly, it is probably because the
batteries are discharged. In that case, replace them by new ones of the
same type (see paragraph Before the first use).
Please dispose of the old batteries in an environmentally friendly way.