Filter
Top Products
Copyright © 2014 Deere & Company. All Rights Reserved. THIS MATERIAL IS THE PROPERTY OF DEERE & COMPANY. ALL USE AND OR REPRODUCTION NOT
SPECIFICALLY AUTHORIZED BY DEERE & COMPANY IS PROHIBITED.
All information, illustrations, and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to
make changes at any time without notice.
HXE62633 (08SEP14)
8 9
6 7
READ SAFETY INFORMATION IN
OPERATOR’S MANUAL
Always follow all safety procedures posted
on the machine and in the Operator’s
Manual. Before carrying out any
inspection or cleaning, always shut OFF
engine, set parking brake, and remove key.
IMPORTANT: Thoroughly clean the
machine from top to bottom with
compressed air. First clean all areas
accessible from engine deck.
Start with cleaning cooling package.
Restart engine after cleaning cooling
package area. Run engine briey at high
idle to clear dislodged crop debris from
cooling package area. Shut OFF engine
and remove key. Continue cleaning in
engine compartment. Blow crop debris
out towards left side of machine.
Work outwards and counterclockwise to
other areas around engine compartment
and rear deck. Thoroughly clean around
turbocharger and exhaust manifold areas
on engine. Thoroughly clean outside area
around Exhaust Aftertreatment Enclosure
(if equipped.) Open top access door
on Exhaust Aftertreatment Enclosure.
Thoroughly clean inside of enclosure,
around the sensor locations, band clamps,
and outer surfaces of canister. Once top
rear areas around engine compartment,
Exhaust Aftertreatment Enclosure, and
rear deck are clean proceed to clean
remaining areas accessible from ground
level.
Shields and Braces
•
Left side of feeder house, on reverser
gearcase (6).
•
Left side of frame, behind tailings
elevator (7).
Wiring Harnesses and Hydraulic Hoses
•
Area behind Battery Box (8).
Rear Hood Area
•
Below rear straw walker shaft (9).