Filter
Top Products
11
Figure 5. Figure 6.
Unplug the front-to-rear harness (G). Hold the handle on the floorboard and
lift up front section. Front and rear
sections can be separated.
Figure 7. Figure 8.
Remove the Front Basket (H) by Push the Tiller Angle Adjustment by
lifting. Lever (I) downward to adjust the
tiller down. Push the lever back up to
lock the tiller.
Figure 9.
There are 6 main parts after
disassembling the scooter. It consists
of the front, rear sections, seat, basket,
and two battery cases.