Invacare SC Rehab Seat Power Wheelchair Mobility Aid User Manual


 
Invacare
®
TDX
®
SC Rehab Seat Power Wheelchair
Accessories and Options
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, OH USA
44035-4190
800-333-6900
All rights reserved. Trademarks are identified by the symbols ™ and ®. All trademarks
are owned by or licensed to Invacare Corporation unless otherwise noted.
Products designated by ASL are Manufactured by Adaptive Switch Labs, Inc.
Therafin is a registered trademark of W/R Medical Electronics Co.
Freedom Designs is a registered trademark of Freedom Designs, Inc.
Specifications and prices are subject to change without notification.
©2008 Invacare Corporation
Form No. 07-039 Rev 1108
TDX SC Specifications
Seat Width Range: (in 1" increments)
ADULT (Adjust)
Seat Depth Range:
16" - 20"
Back Height Range:
16" - 24"
Back Angle Range:
85° to 105° in 5" increments
Seat-to-Floor
(approximate) Rehab Seat Elevating
Standard 16.5" @ 0° 16.75" @ 0°
Medium 17.5" @ 0°
Tall 18.5" @ 0°
At 5° add .5" to Med or
Tall. Low STF height not
available at 5°
Semi Recline Solid Seat
16” Low, 17” Med
Overall Width of Base:
24" (w/o Joystick)
Overall Height (ADJASBA)
(with 20" back height & 0° seat angle)
Standard: 36.5"
Medium: 37.5"
Tall: 38.5"
Overall Height
Semi Recline 38” w/headrest
Semi Recline 45 inches w/o headres
Overall Length: w/o front rigging 35.25"
w/ 90° front rigging 43"
Weight:
Rehab Seat
2 Pole Motor w/o U1 Batteries 178 lbs
w/ two (2) U1 Batteries 225 lbs
Elevate
w/o U1 Batteries 178 lbs
w/ Batteries 225 lbs
Weight:
Semi Recline Van Seat
2 Pole Motor w/o U1 Batteries 183 lbs
w/U1 Batteries 230 lbs
Drive Axle:
Non-Adjustable
Drive Wheels/Tires: (Foam Filled)
Standard 10.5" x 3.5"
MEMORY CARD - BASIC
Standard with ALL Expandable Control Systems (MPJ+, PSR+, PSF+, MK6i
Display).
Used to Back Up/Restore Programmed Settings for Only One Chair.
May be given to user or kept with provider's files for safe keeping.
Does not Contain Advanced Diagnostics/Help Screens/File Structure.
Not compatible with SPJ+ Joysticks.
MEMORY CARD - PROFESSIONAL
Standard with ALL MK6i Programmers.
Available also with USB Card Reader on Order Form.
Contains Advanced Diagnostics, Help Screens, Software Updates, File
Storage/Retrieval.
Used to back up multiple chairs and programming settings.
Intended for use by qualified providers only.
Not compatible with SPJ+ Joysticks.
Contoura Seat Sizes
D16 D17 D18 D19 D20
W16
X X X X X
W18 X X X X X
W20 X X X X X
Back Heights 25" or 29.5"
Weight Limit 250 Pounds (Standard)
Invacare recommends all wheelchairs be fitted and programmed
to the consumer under the guidance of a healthcare professional,
knowledgeable of the particular limitations of the product.