Filter
Top Products
A.B.S. Curved Back Assembly
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
NOTE: A.B.S. Curved Back mounts only to the ProntoR2 back canes without a 10 degree bend.
NOTE: Back Cover and foam are sold as a Back Cushion Assembly only.
Item
Number
Part Number
DescriptionNote
Quantity Per
Package Assembly
See Chart # 1 Back Pan - 16" to 19" W 1 11
See Chart # 1 Back Pan - 20" W to 22" W 1 11
See Chart # 2 Back Cushion Assembly - 16" W to 19" W 1 12
See Chart # 2 Back Cushion Assembly - 20" W to 22" W 1 12
See Chart # 3 Back Assembly with Hardware - 16" W to 19"
W
1 13
See Chart # 3 Back Assembly with Hardware - 20" W to 22"
W
1 13
1125723 Kit, Hook Fastener w/ Adhesive Back 1 1A
A - Not Shown. Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered when a
new Back Pan or Back Assembly is requested.
NOTE:
34
To order call toll free 1-800-333-6900, or www.invacare.com
Form No.
01-039